This study characterized 1018 steel case-hardened in processed cassava leaves. The microstructures, phases and case depths of treated samples were characterized and the effect of soaking time on case depth was determined. Standard specimens machined from 1018 steel were pack-cyan...
Open access
Research Article10.9734/ACRI/2018/42632
D. A. Isadare, M. O. Adeoye, A. R. Adetunji, K. M. Oluwasegun & K. J. Akinluwade·Advances in Research·2015
This paper reports the effect of homogenization treatment on T6 tempering of 6063 aluminium alloy. Wrought 6063 aluminium sample was machined into tensile and impact tests specimens. Samples were also cut for hardness and metallographic works. These samples were divided into two...
Open access
Research Article10.9734/AIR/2015/18166
This paper investigates the influence of diffusion annealing on some mechanical properties of 6063 aluminium alloy. Standard tensile and hardness test samples were subjected to diffusion annealing at 570ºC for 2, 2.5, 3 and 3.5 hours respectively prior to T6 tempering, another se...
Open access
Research Article10.9734/BJAST/2014/10446
A. R. Adetunji, D. A. Isadare, K. J. Akinluwade & O. O. Adewoye·Advances in Research·2015
Cassava plant and its products have long been used as food and feed but lately as industrial ingredients. The present study unveils various agricultural and industrial applications of cassava especially the waste cyanogenic component which hitherto has constituted a huge agricult...
Open access
Research Article10.9734/AIR/2015/15417
This study made a comparison between low and high-temperature pack cyaniding. Specific focus includes microstructure, surface hardness and case depth of treated samples. Standard specimens machined from mild steel were pack cyanided at 550°C (low temperature) and 950°C (high temp...
Open access
Research Article10.9734/ACRI/2018/37198
Heat sinks are integral components of high-powered computing system (HPC) microchips which are extensively used in modern electronics and power supply circuitries with intelligence and effective control capability. Integrated circuits typically generate large amount of heat suffi...
Open access
Research Article10.9734/BJAST/2015/15214
A. A. Abioye, P. O. Atanda, S. B. Majolagbe, D. A. Isadare, O. P. Abioye, K. J. Akinluwade & A. R. Adetunji·Advances in Research·2015
This paper presents the selection of suitable candidate materials for thermal barrier coating of gas turbine blade using GRANTA software. There have been reported cases of gas turbine blade failure in service due to the extreme service conditions. Such failure could possibly have...
Open access
Research Article10.9734/AIR/2015/15769
This study determined the Pb pollution levels of lead (Pb) in Ibadan. Until 1970, Ibadan was the largest city in Sub-Saharan Africa and the current largest city in West Africa. Dust samples were randomly collected from selected sites, cleaned, air-dried and sieved. Pb level was d...
Open access
Research Article10.9734/ACSJ/2015/10566