Aims: The present study aims to investigate the effect of size reduction on mechanical properties of kenaf particle reinforced polymer (K-PRP) composites for industrial application. Study Design: Decorticated kenaf mixed (core & bast) fibres were sourced from Institute of Agr...
Open access
Research Article10.9734/jmsrr/2019/v2i128
Aims: The main purpose of this paper is to present a boundary integral equation modeling to obtain the solution for the problems of magneto-thermoelastic functionally graded anisotropic (FGA) structures in the context of the Green and Naghdi theory of type III. Study Design: Prac...
Open access
Research Article10.9734/jmsrr/2019/v2i129
Various energy sources are utilized at present with a challenge of energy storage in many cases. The existing rechargeable storage batteries which include sodium-ion and lithium-ion batteries have some limitations in their gravimetric capacities. Ab initio methods based on densit...
Open access
Research Article10.9734/jmsrr/2019/v2i130
Thermoelectricity is a technology that achieves thermal-to-electric conversion and vice versa. It requires high performance thermoelectric compounds for effective conversion efficiency. The thermoelectric properties of CdO in the rocksalt structure, obtained by first principle ca...
Open access
Research Article10.9734/jmsrr/2019/v2i126
Pure zinc oxide (ZnO) and copper (Cu) doped ZnO thin films were synthesised from the precursor’s concentrations (zinc acetate and copper acetate) onto glass substrate via spray pyrolysis deposition technique at 350°C in air ambient with different Cu doping concentrations (0%, 5%,...
Open access
Research Article10.9734/jmsrr/2018/v1i425
The present study explored the feasibility of using cassava leaves (CL) cyanide for surface strengthening of ductile cast irons through heat treatment. Dried cassava leaves were pulverized and sieved to 500 µm particle size, the pulverised mass was mixed with BaCl2 (energizer) at...
Open access
Research Article10.9734/jmsrr/2018/v1i423
Aim: The corrosion inhibition mechanism of aluminium Alloy AA5052 has been studied in acidic solution. The study used gravimetric and electrochemical impedance spectroscopy to verify the inhibition efficacy of Epiphyllum Oxypetalum Leaf Extract At Varied Concentrations. Study Des...
Open access
Research Article10.9734/jmsrr/2018/v1i424
The development of composite materials filled using Construction and Demolition wastes (CDW), characterised by descent mechanical and thermo-insulating properties has been investigated experimentally in this paper. Composites of epoxy resin containing CDW of different grain size...
Open access
Research Article10.9734/jmsrr/2018/v1i422
Modified boron- doped diamond (BDD) electrodes from copper (Cu) electroless process were produced and characterised aiming their application at nitrate electrochemical removal. Cu deposits on BDD surface may promote its conductivity and selectivity increase mainly for nitrate ion...
Open access
Research Article10.9734/jmsrr/2018/v1i421
Lead sulphide (PbS) thin films were deposited at different times on a zinc plate substrates using electrodeposition technique at room temperature. The results showed that PbS thin films resistivity has a direct proportionality with time. The optical properties of the thin film we...
Open access
Research Article10.9734/jmsrr/2018/v1i319