Skip to content
Research Article Open access

Development of a Chewing Simulator for Testing Dental Materials: A Pilot Study

Hazem Abouelleil, Christophe Jeannin, Amadou Sadat, Brigitte Grosgogeat

Current Journal of Applied Science and Technology · pp. 1–8 · Published 8 Oct 2014

10.9734/BJAST/2015/13003

Abstract

This paper presents the primary results of the development of a chewing bench prototype. The final aim of the device is to reproduce the human oral cavity environment in order to predict ageing of dental materials, it automatically imitates chewing cycles and reproduces the physical and chemical changes observed during meals. A dental articulator used for prosthodontics was chosen as an ideal structure for simulating human mandible kinematics; it has the advantage of being water tight compared to a hexapod device. Using Open Meca® software and three motors the extreme movements of the mandible were replicated. Four thermally controlled tubs were used to mimic physical and chemical changes observed during meal. The chewing bench provides a valuable tool for the evaluation of dental materials; its relevance is based on the simultaneous presence of all parameters that affect dental materials during function (mechanical, thermal and chemical). It is the first stage of work which will be validated a posteriori. This chewing bench would hopefully reduce the gap between in vitro performance and in vivo observation and serve as a benchmark for existing materials and as a device for testing new ones.

Mastication dental simulator modeling mandible movements

References (14)

  1. 1 Resin-based composite performance: Are there some things we can’t predict? [DOI]
  2. 2 How to qualify and validate wear simulation devices and methods [DOI]
  3. 3 How to simulate wear? [DOI]
  4. 4 An artificial oral environment for testing dental materials [DOI]
  5. 5 Is the wear of dental composites still a clinical concern? [DOI]
  6. 6 Two-body wear of dental restorative materials [DOI]
  7. 7 Correlation of wear in vivo and six laboratory wear methods [DOI]
  8. 8 The relationship between physical parameters and wear of dental composites [DOI]
  9. 9 A multifunctional device to simulate oral ageing: the “Rub&Roll” [DOI]
  10. 10 An in vitro comparative assessment of different enamel contaminants during bracket bonding [DOI]
  11. 11 Mastication and Swallowing: 1. Functions, Performance and Mechanisms [DOI]
  12. 12 Robotic chewing simulator for dental materials testing on a sensor-equipped implant setup.
  13. 13 Material characteristics of a novel shrinkage-free ZrSiO4 ceramic for the fabrication of posterior crowns [DOI]
  14. 14 Development of a Novel Biomimetic Dental Wear System [DOI]

Cited by 17

Tooth Mobility Reproduction in Dental Material Research: A Scoping Review

Yee Ang, Masfueh Razali, Norziha Yahaya · The Open Dentistry Journal · 2020

Tissue Engineering for Periodontal Ligament Regeneration: Biomechanical Specifications

R. Gauthier, Christophe Jeannin, N. Attik · Journal of Biomechanical Engineering · 2020

Fatigue behavior of three thin CAD/CAM all-ceramic crown materials

Khaled Bataineh, Mohammad Al Janaideh · International Biomechanics · 2023

Intelligent automation of dental material analysis using robotic arm with Jerk optimized trajectory

Robertas Damaševičius, Rytis Maskeliūnas, Gintautas Narvydas · Journal of Ambient Intelligence and Humanized Computing · 2020

Kinematical Synthesis and Numerical Analysis of Rail-Based Dual-Axis Solar Tracking System

Arun A. Yadav, Chetan O. Yadav, Paladugula V. Ramana · Lecture Notes in Electrical Engineering · 2017

<p>Fatigue Failure Load of Molars with Thin-Walled Prosthetic Crowns Made of Various Materials: A 3D-FEA Theoretical Study</p>

Noor Al Mortadi, Khaled Bataineh, Mohammad Al Janaideh · Clinical, Cosmetic and Investigational Dentistry · 2020

Showing 6 of 17 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

57

Page views

0

PDF downloads

16

Outbound clicks

17

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.