Skip to content
Research Article Open access CC BY 4.0

Design and Evaluation of Livestock Dewatering Machine

A. O. Igbozulike, U. D. Bill

Current Journal of Applied Science and Technology · pp. 1–6 · Published 16 Jul 2015

10.9734/BJAST/2015/17858

Abstract

A livestock dewatering machine was designed, fabricated and evaluated to improve on-farm management of animal waste. This is in response to the need to reduce and eliminate the many challenges of improper waste handling in livestock production farms in Nigeria. The machine consists of a hopper, gear rack, shaft, speed reducer, ball bearings, screen, and discharge chute. The machine is manually operated by cranking of the handle which transmits torque to the shaft and thus set the rack in motion. The rack compresses the slurry against the wall of hard casing, and the liquid is separated from the waste and let out through the screen at the bottom of the casing, leaving the dewatered waste to escape through the discharge chute. Particle size distribution analysis guided the choice of screen size of 2 mm diameter. The machine was tested with pig dung, and it gave a throughput capacity of 472.75 kh/hr and a separating efficiency of 9%.

Livestock waste dewatering machine design pig dung separation

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.