Skip to content
Research Article Open access CC BY 3.0

Offshore Sand as a Fine Aggregate for Concrete Production

D. A. R. Dolage, M. G. S. Dias, C. T. Ariyawansa

Current Journal of Applied Science and Technology · pp. 813–825 · Published 15 May 2013

10.9734/BJAST/2013/3290

Abstract

The aim of this study is to test the relevant properties of offshore sand obtained soon after dredging and to examine the effects on chloride levels of offshore sand when fresh water is drained to simulate average monthly rainfalls. The findings are valid for offshore sand that does not require washing particularly to remove organic matter and other contaminants. As per the results of sieve analysis, grading of the offshore sand is within the limits specified in BS 882:1992. The compressive strength of grade 25 concrete which is the mostly used structural concrete is also within the acceptable limits. The shell content of offshore sand for shells finer than 10 mm and coarser than 5 mm is 6.5 per cent. This is far below the 20 per cent limit specified in BS 882:1992. For grade 25 concrete produced with OPC, an allowable limit of 0.101 per cent by weight of sand was computed for chloride content in offshore sand. The chloride content of offshore sand obtained soon after dredging was 0.04%. Even a rainfall as low as 9.9 mm can reduce the chloride content (range from 0.01 to 0.05) to levels far below the allowable limit (0.101). Rainfalls as high as 581 mm could wash away chlorides almost completely (below 0.01). The study revealed that offshore sand obtained from 2 to 7 km away from the western coast, Sri Lanka soon after dredging, could be used as an alternative to river sand.

Offshore sand concrete fine aggregate chloride content

Cited by 20

Use of concrete formulations based on dredging sand in the fabrication of tetrapods for protection of harbour dykes

Mehdi Hassoune, Hassan Fatmaoui, Jamal Chaoufi · Materials Today: Proceedings · 2022

Potential of Fly Ash Polymerized Sand as an Alternative for River Sand in Concrete- A State of the Art Report

G Lizia Thankam, T R Neelakantan, S Christopher Gnanaraj · IOP Conference Series: Materials Science and Engineering · 2020

Geopolymer concrete material characteristics

Mohamed Elchalakani, Bo Yang, Kuanhong Mao · Geopolymer Concrete Structures with Steel and FRP Reinforcements · 2023

Waste Foundry Sand in Concrete Production Instead of Natural River Sand: A Review

Jawad Ahmad, Zhiguang Zhou, Rebeca Martínez-García · Materials · 2022

Comparative study of geopolymer and alkali activated slag concrete comprising waste foundry sand

Bavita Bhardwaj, Pardeep Kumar · Construction and Building Materials · 2019

Study of Strength and Durability Characteristics of Concrete Mixes Made by Unwashed Sea Sand as Fine Aggregates

Muhammad Masood Rafi, Muhammad Aslam Bhutto, Tariq Aziz · Advances in Civil Engineering Materials · 2022

Corrosion Behavior of Stainless Steel in Chloride-Contaminated Carbonated Concrete

Federica Lollini, Maddalena Carsana, Matteo Gastaldi · Advances in Civil Engineering Materials · 2019

Mechanical behaviors of GFRP tube confined recycled aggregate concrete with sea sand

Yijie Huang, Jianzhuang Xiao, Li Qin · Advances in Structural Engineering · 2020

Behaviour of sea sand recycled concrete filled steel tube under axial compression

Yijie Huang, Jida Wu, Qing Wang · Proceedings of the Institution of Civil Engineers - Structures and Buildings · 2020

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

20

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.