Optimization of Building Energy Performance through Passive Design Strategies

References (46)

1. 1 A global review of energy consumption, CO 2 emissions and policy in the residential sector (with an overview of the top ten CO 2 emitting countries) [DOI]
2. 2 Life cycle energy analysis of buildings: An overview [DOI]
3. 3 UNITED NATIONS FRAMEWORK CONVENTION ON CLIMATE CHANGE (UNFCCC) [DOI]
4. 4 Thermal and sound insulation materials from waste wool and recycled polyester fibers and their biodegradation studies [DOI]
5. 5 Optimization of building window system in Asian regions by analyzing solar heat gain and daylighting elements [DOI]
6. 6 Effect of louver shading devices on building energy requirements [DOI]
7. 7 The role of thermal mass on the cooling load of buildings. An overview of computational methods [DOI]
8. 8 Influence of window size on the energy balance of low energy houses [DOI]
9. 9 Comparative assessment of internal and external thermal insulation systems for energy efficient retrofitting of residential buildings [DOI]
10. 10 Analysis and modelling of window and glazing systems energy performance for a well insulated residential building [DOI]
11. 11 Passive design strategies and performance of Net Energy Plus Houses [DOI]
12. 12 Energy demands and potential savings in European office buildings: Case studies based on EnergyPlus simulations [DOI]
13. 13 Effect of thermal mass on the thermal performance of various Australian residential constructions systems [DOI]
14. 14 The development of a monolithic aerogel glazed window for an energy retrofitting project [DOI]
15. 15 United States energy and CO2 savings potential from deployment of near-infrared electrochromic window glazings [DOI]
16. 16 Coupling of thermal mass and natural ventilation in buildings [DOI]
17. 17 Effect of thermal mass on life cycle primary energy balances of a concrete- and a wood-frame building [DOI]
18. 18 Thermal and economic windows design for different climate zones [DOI]
19. 19 Modeling, Design, and Optimization of Net‐Zero Energy Buildings [DOI]
20. 20 Environmental and economic analysis of building integrated photovoltaic systems in Italian regions [DOI]
21. 21 Research on the development of main policy instruments for improving building energy-efficiency [DOI]
22. 22 An environmental impact comparison of external wall insulation types [DOI]
23. 23 Application of super-insulating translucent silica aerogel glazing system on commercial building envelope of humid subtropical climates – Impact on space cooling load [DOI]
24. 24 Environmental impact of thermal insulation thickness in buildings [DOI]
25. 25 Aerogel granulate glazing facades and their application potential from an energy saving perspective [DOI]
26. 26 Analysis of daylight factors and energy saving allowed by windows under overcast sky conditions [DOI]
27. 27 Investigation of solar potential of housing units in different neighborhood designs [DOI]
28. 28 Multi-objective optimization of thermal modelled cubicles considering the total cost and life cycle environmental impact [DOI]
29. 29 An empirical study of performance characteristics of BIPV (Building Integrated Photovoltaic) system for the realization of zero energy building [DOI]
30. 30 Arte de proyectar en arquitectura
31. 31 The effect of transition gradient in thermochromic glazing systems [DOI]
32. 32 Simulation of energy saving in Iranian buildings using integrative modelling for insulation [DOI]
33. 33 Overview of natural cross-ventilation studies and the latest simulation design tools used in building ventilation-related research [DOI]
34. 34 Investigation on the thermal performance of different lightweight roofing structures and its effect on space cooling load [DOI]
35. 35 Modeling, validation and time-dependent simulation of the first large passive building in Romania [DOI]
36. 36 Vacuum tube window technology for highly insulating building fabric: An experimental and numerical investigation [DOI]
37. 37 Limiting windows offset thermal bridge losses using a new insulating coating [DOI]
38. 38 Zero-energy buildings: the challenges [DOI]
39. 39 Feasibility study of “green” insulation materials including tall oil: Environmental, economical and thermal properties [DOI]
40. 40 Influence of the compactness index to increase the internal temperature of a building in Saharan climate [DOI]
41. 41 Transient modeling of high-inertial thermal bridges in buildings using the equivalent thermal wall method [DOI]
42. 42 Theoretical assessment of the combined effects of building thermal mass and earth–air-tube ventilation on the indoor thermal environment [DOI]
43. 43 Optimal design of photovoltaic energy collectors with mutual shading for pre-existing building roofs [DOI]
44. 44 The effect of mineral micro particle in coating on energy consumption reduction and thermal comfort in a room with a radiation cooling panel in different climates [DOI]
45. 45 The Effects of Orientation on Energy Consumption in Buildings in Kazakhstan [DOI]
46. 46 Energy conservation using solar collectors integrated with building louver shading devices [DOI]

Cited by 93

Showing 51 of 93 known citations — external sources report more than can currently be individually listed.

Related research

• Impact of Cladding Material and Air Cavity on Ventilated Facades in Warm Semi-Arid Climates — shares topic coverage