Skip to content
Research Article Open access CC BY 3.0

Tribological Aspects of Thermally Sprayed Red Mud-Fly Ash and Red Mud-Al Coatings on Mild Steel

Harekrushna Sutar, Subash Chandra Mishra, Santosh Kumar Sahoo, Himanshu Sekhar Maharana, Ananta Prasad Chakraverty

Chemical Science International Journal · pp. 1014–1031 · Published 25 Aug 2014

10.9734/ACSJ/2014/12691

Abstract

The present research work explains the dry sliding wear characteristics of thermally sprayed red mud and its composite coatings. Composite of red mud, fly ash and aluminium are plasma sprayed at 6, 9, 12 and 15 kW operating power levels. The coatings were experimented to study the tribological behaviour like dry sliding wear behaviour, XRD phase transformation, coating thickness, coating morphology, wear morphology, wear mechanism and co-efficient of friction. 10% Fly ash and 5% aluminium powder were mixed separately by weight with pure red mud and sliding wear test was conducted using pin on disc wear test machine. The test was performed with track diameter of 100 mm and at sliding speed of 100 rpm (0.523 m/s) at a normal load of 20 N. Coating property was discriminated by variation of sliding time length. Operating power was found to be remarkable variable for wear rate, coating thickness, coating morphology and friction coefficient. Significant increase in wear resistance was observed with fly ash and aluminium addition, resulting in an increase in interfacial bond strength and dense film formation.  

Red mud fly ash aluminium plasma coating sliding wear behaviour

References (13)

  1. 1 Coatings tribology—contact mechanisms and surface design [DOI]
  2. 2 Progress of Red Mud Utilization: An Overview [DOI]
  3. 3 Dry Sliding Wear Behavior of Aluminium Matrix Composite Using Red Mud an Industrial Waste [DOI]
  4. 4 Erosion Wear Analysis of Plasma Sprayed Ceramic Coating Using the Taguchi Technique [DOI]
  5. 5 Wear Behavior of WC-12%Co Coatings Produced by Air Plasma Spraying at Different Standoff Distances [DOI]
  6. 6 Wear Mechanisms in Thermally-Sprayed Mo-Based Coatings [DOI]
  7. 7 Characterization of Plasma Sprayed Pure Red Mud Coatings: An Analysis [DOI]
  8. 8 Morphology and solid particle erosion wear behavior of red mud composite coatings [DOI]
  9. 9 Wear and microstructure in fine ceramic coatings [DOI]
  10. 10 Effects of additives on friction and wear behaviour of Cr2O3 coatings [DOI]
  11. 11 Evaluation and Characterization of Plasma Sprayed Cu Slag-Al Composite Coatings on Metal Substrates [DOI]
  12. 12 Higher Engineering Science [DOI]
  13. 13 Thermal Spray Coating of Redmud on Metals

Cited by 6

What hinders the green supply chain management adoption in the Indian aluminium sector?

Swayam Sampurna Panigrahi, Supriti Mishra, Bandita Sahu · Environment, Development and Sustainability · 2024

Utilization of Red Mud as Sustainable Material: A State of Art Review

Akhilesh Buxi Pattanaik, Lasyamayee Garanayak · Lecture Notes in Civil Engineering · 2022

Recycling: Vom Schlamm zum Granulat

Heinzhorst Moebius, Horst Schmidt, Sebastian Hippmann · Nachrichten aus der Chemie · 2022

Wettability, Thermal and Sliding Behavior of Thermally Sprayed Fly Ash Premixed Red Mud Coatings on Mild Steel

Harekrushna Sutar, Birupakshya Mishra, Rabiranjan Murmu · Materials Sciences and Applications · 2020

Study on mechanical and microstructure behavior of submerged arc welding flux using red mud

Rishi Dewangan, Pankaj K. Pandey, Renu Upadhyay · AIP Conference Proceedings · 2018

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

6

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.