Skip to content
Research Article Open access CC BY 3.0

Heat Transfer and Solidification of Molten Iron in a Pipe

Miguel A. Barron, Cesar Lopez, Dulce Y. Medina

Advances in Research · pp. 987–1002 · Published 16 Aug 2014

10.9734/AIR/2014/11625

Abstract

The effect of the pipe wall temperature on the heat transfer and the internal solidification phenomena during the pouring of pure molten iron in a pipe is studied in this work. A mathematical model consisting in the motion, mass balance and heat equations is proposed. The Reynolds Stress Model is employed to simulate turbulence. The mathematical model considering transient three-dimensional simulations is numerically solved using the Computational Fluid Dynamics technique. To simplify the mushy zone problem, pure iron considered. Numerical simulations show that a pipe wall temperature of 300 K promotes early solidification and blockage, and yields strong internal gradients of velocity and temperature. Besides, a pipe wall temperature of 1000 K prevents solidification and promotes a more homogeneous flow and temperatures contours of molten iron in the pipe.  

CFD heat transfer metal solidification molten iron pipe blockage

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.