Skip to content
Research Article Open access CC BY 4.0

Effect of End Step Shape in the Performance of Stilling Basins Downstream Radial Gates

Gamal H. Elsaeed, Abdelazim M. Ali, Neveen B. Abdelmageed, Ahmed M. Ibrahim

Journal of Scientific Research and Reports · pp. 1–9 · Published 23 Sep 2015

10.9734/JSRR/2016/21452

Abstract

Stilling basins are in common use when designing heading-up hydraulic structures such as barrages, dams, weirs …etc. This research paper investigates the effect of stilling basin shapes with different heights of end step on the characteristics of submerged hydraulic jump and the energy dissipation downstream the radial gate. Generally, this research investigate the main characteristics and parameters of the submerged hydraulic jump such as; the vertical velocity distribution, the near bed velocity decay along stilling basin, and the stability of bed protection downstream the stilling basin. In the present research paper, these characteristics will be tested in a pool-type stilling basin with end steps downstream (DS) the radial gate of new spillway of Assuit Barrages. The experimental program was conducted on a re-circulating flume with 1.0 m wide, 26.0 m long and 1.2 m deep, with discharges range from 40 to 190 l/s. Statistical equation was developed to correlate the length of submerged jump with the other independent parameters. Finally, clear matching of results from the length of jump and velocity analysis was obtained.

Stilling basin end sill radial gate submerged hydraulic jump submerged ratio.

Cited by 7

The Effects of Different Shaped Baffle Blocks on the Energy Dissipation

Nassrin Jassim Hussien Al-Mansori, Thair Jabbar Mizhir Alfatlawi, Khalid S. Hashim · Civil Engineering Journal · 2020

Numerical Investigation of Critical Hydraulic Parameters Using FLOW-3D: A Case Study of Taunsa Barrage, Pakistan

Muhammad Waqas Zaffar, Ishtiaq Haasan, Abdul Razzaq Ghumman · Fluids · 2023

Investigation of Hydraulic Performance of Standard and Modified USBR Type III Stilling Basin Using Scale Modeling: A Case Study of Mohmand Dam Spillway, Pakistan

Hassan Raza, Muhammad Kaleem Sarwar, Faraz ul Haq · Iranian Journal of Science and Technology, Transactions of Civil Engineering · 2023

Hydraulics of submerged radial gates with a sill

Fahmy Salah Fahmy Abdelhaleem · ISH Journal of Hydraulic Engineering · 2017

Performance of sills over aprons under the effect of submerged hydraulic jump, (case study: Naga Hammadi Barrage)

Yasser A. Moussa, Abde-lAzim M. Ali, Yasser K. Saleh · Ain Shams Engineering Journal · 2018

Laboratory study of stilling basin using trapezoidal bed elements

Thair J.M. Al-Fatlawi, Nassrin J.H. Al-Mansori, Nariman Y. Othman · Scientific Review Engineering and Environmental Studies (SREES) · 2020

An Optimal Design of the Inlet and Outlet Obstacles at USBR II ‎Stilling Basin

Saba Soori, Hamidreza Babaali, Nasim Soori · International Journal of Science and Engineering Applications · 2017

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

7

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.