Introducing Some Correlations to Calculate Entropy Generation in Extended Surfaces with Uniform Cross Sectional Area

References (35)

1. 1 Effect of aspect ratio on entropy generation in a rectangular cavity with differentially heated vertical walls [DOI]
2. 2 Entropy generation for natural convection in an inclined porous cavity [DOI]
3. 3 On the performance and entropy generation of the double-pass solar air heater with longitudinal fins [DOI]
4. 4 Optimization design of shell-and-tube heat exchanger by entropy generation minimization and genetic algorithm [DOI]
5. 5 Fin Geometry for Minimum Entropy Generation in Forced Convection [DOI]
6. 6 Heat transfer and entropy generation optimization of forced convection in porous-saturated ducts of rectangular cross-section [DOI]
7. 7 Entropy generation and optimal analysis for laminar forced convection in curved rectangular ducts: A numerical study [DOI]
8. 8 Entropy generation analysis for the design improvement of a latent heat storage system [DOI]
9. 9 Entropy generation minimization of a double-pipe pin fin heat exchanger [DOI]
10. 10 Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios [DOI]
11. 11 Experiments and entropy generation minimization analysis of a cross-flow heat exchanger [DOI]
12. 12 A numerical study on entropy generation and optimization for laminar forced convection in a rectangular curved duct with longitudinal ribs [DOI]
13. 13 Employing exergy-optimized pin fins in the design of an absorber in a solar air heater [DOI]
14. 14 Application of the entropy generation minimization method to a solar heat exchanger: A pseudo-optimization design process based on the analysis of the local entropy generation maps [DOI]
15. 15 Entropy generation analysis of nanofluid flow in a circular tube subjected to constant wall temperature [DOI]
16. 16 A numerical study on entropy generation induced by turbulent forced convection in curved rectangular ducts with various aspect ratios [DOI]
17. 17 A distributed parameter model and its application in optimizing the plate-fin heat exchanger based on the minimum entropy generation [DOI]
18. 18 Optimization of heat sink configuration for thermoelectric cooling system based on entropy generation analysis [DOI]
19. 19 Forced convection and entropy generation from elliptic tubes with longitudinal fins [DOI]
20. 20 A numerical evaluation of combustion in porous media by EGM (Entropy Generation Minimization) [DOI]
21. 21 Entropy generation in natural convection in a symmetrically and uniformly heated vertical channel [DOI]
22. 22 Minimizing the entropy generation rate of the plate-finned heat sinks using computational fluid dynamics and combined optimization [DOI]
23. 23 Investigation of entropy generation over a backward facing step under bleeding conditions [DOI]
24. 24 Discussion on the applicability of entropy generation minimization to the analyses and optimizations of thermodynamic processes [DOI]
25. 25 Numerical predictions of entropy generations for mixed convective flows in a vertical channel with transverse fin array [DOI]
26. 26 Entropy generation minimization in turbulent mixed convection flows [DOI]
27. 27 Numerical investigation on developing laminar forced convection and entropy generation in a wavy channel [DOI]
28. 28 Optimal package design of stacks of convection-cooled printed circuit boards using entropy generation minimization method [DOI]
29. 29 An improved method for analyzing a fin and tube evaporator containing a zeotropic mixture refrigerant with air mal-distribution [DOI]
30. 30 Entropy generation minimization: A practical approach for performance evaluation of temperature cascaded co-generation plants [DOI]
31. 31 Thermal-hydraulic design of fan-supplied tube-fin condensers for refrigeration cassettes aimed at minimum entropy generation [DOI]
32. 32 Entropy generation and heat transfers via laminar forced-convection channel flows over transverse fins in entrance regions [DOI]
33. 33 Investigation into radiation of a plate-fin heat exchanger with strip fins [DOI]
34. 34 Entropy Generation in a Plate-Fin Compact Heat Exchanger with Louvered Fins
35. 35 Effects of mass flow rate in terms of pressure drop and heat transfer characteristics

Cited by 4

Showing 2 of 4 known citations — external sources report more than can currently be individually listed.

Related research

• Analytical Modeling of the Thermoelectric Effect in Photovoltaic Cells: Combined Solar Photovoltaic and Thermoelectric Generator System (PV+TEG) — shares topic coverage
• Topographic Control of Temperature Distribution and Thermal Comfort: A Comparative Study of Hill and Plain Stations in North-East India — shares topic coverage