A Single Machine Brushless DFIG for Grid-Connected and Stand-Alone WECS
Mahmoud A. Saleh, Mona N. Eskander
Current Journal of Applied Science and Technology · pp. 3550–3562 · Published 2 Jul 2014
10.9734/BJAST/2014/11575Abstract
In this paper a new design for brushless doubly fed induction machine for operation as generator in wind energy systems is proposed. This machine, named single machine- brushless doubly fed induction generator (SM-BDFIG) is composed of three main components; a regular three phase wound rotor induction machine, a power electronic converter, and a pack of rechargeable Lithium-ion batteries. The converter is mounted on the outer surface of a web reinforced hollow metallic (aluminum) or fiber glass cylinder. The battery packs are embedded in the inner part of the cylinder between the webs. The hollow cylinder is mechanically coupled with the induction machine on the same shaft. Therefore, all the three main components of the SM-BDFIG rotate with the same angular speed. A brief description and analysis of the proposed machine merits, parameters, and characteristics are given. The authors could provide the detailed designs of SM-BDFIG and the required testing facilities to the manufacturer who is ready to fabricate the first product of SM-BDFIG and facilitate their testing.
Cited by 7
M. Nashed, M. Eskander, M. A. Saleh · Indonesian Journal of Electrical Engineering and Computer Science · 2019
M. A. Saleh, M. Eskander, M. Nashed · 2015
M. A. Saleh, M. Nashed, M. Eskander · 2015
M. Eskander, M. A. Saleh, M. Nashed · 2015
M. Nashed, M. Eskander, M. A. Saleh · 2019
M. A. Saleh, M. N. Nashed, M. Eskander · 2016
M. N. Nashed, M. Eskander, M. A. Saleh · 2016
Related research
- Validating Response of AC Microgrid to Line-to-Line Short Circuit in Islanded Mode Using Dynamic Analysis — shares topic coverage
- Fault Ride Through in Grid-connected WECS Using FACTS — shares topic coverage
- Design of Reactive Power and Voltage Controllers for Converter-interfaced ac Microgrids — shares topic coverage
- One Pot Synthesis of Zr4+doped Carbon Coated LiFePO4 Cathode Material for Rechargeable Li-ion Battery — shares topic coverage
Article metrics
Real usage data collected on this platform.
0
Page views
0
PDF downloads
0
Outbound clicks
7
Citations
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
No views recorded yet.
Traffic sources
Referring site, by host.
No traffic recorded yet.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.