Skip to content
Research Article Open access CC BY 4.0

Analysis of the Effect of Varying Palm Kernel Particle Sizes on the Calorific Value of Palm Kernel Briquette

P. K. Oke, T. O. Olugbade, G. N. Olaiya

Current Journal of Applied Science and Technology · pp. 1–5 · Published 28 Jan 2016

10.9734/BJAST/2016/23148

Abstract

Aims: This work is aimed at analysing the effect of different palm kernel particle sizes on the calorific value of the briquettes produced using this material. Study Design: The palm kernel shell used was obtained from the local market, after which it was taken to the grinder so as to get it into powdered form of different sizes. The powered palm kernel shell was then sieved so as to get the specific particles sizes using mesh of different sizes. Place and Duration of Study: Department of Mechanical Engineering, Federal University of Technology, Akure, Ondo State, Nigeria, between August 2014 and February 2015. Methodology: Three different sizes of mesh were used, 4.756, 2.36, and 0.6 mm labelled A, B and C respectively. The various sizes were then mixed with starch which is the binding material and poured into the briquetting machine operated at a constant pressure of 100 Kg/cm2. The briquette was made and dried. A e2k type combustion calorimeter was used to determine the calorific values of the briquettes. Results: The results show that the calorific values are 18.415, 18.412 and 17.342 MJ/kg for the particle sizes 4.756, 2.36, and 0.6 mm respectively. Conclusion: This result shows the calorific value of the palm kernel briquette increases with the increasing particle sizes.

Briquette palm kernel particle size calorimeter calorific value

Cited by 9

Binderless briquetting technology for lignite briquettes: a review

Temitope Olumide Olugbade, Oluwole Timothy Ojo · Energy, Ecology and Environment · 2020

Characterisation of briquettes from forest wastes: Optimisation approach

Oluwaseyi Kayode Fadele, Temiloluwa Ojuolape Amusan, Ademola Olagoke Afolabi · Research in Agricultural Engineering · 2021

A review on enhanced biofuel production from coffee by-products using different enhancement techniques

Berhanu Sugebo · Materials for Renewable and Sustainable Energy · 2022

Biomass Torrefaction for the Production of High-Grade Solid Biofuels: a Review

Temitope Olumide Olugbade, Oluwole Timothy Ojo · BioEnergy Research · 2020

Economics, Sustainability, and Reaction Kinetics of Biomass Torrefaction

Temitope Olumide Olugbade · Biotechnological Applications of Biomass · 2021

Influence of Binders on Combustion Properties of Biomass Briquettes: A Recent Review

Temitope Olugbade, Oluwole Ojo, Tiamiyu Mohammed · BioEnergy Research · 2019

Physicomechanical Properties of Bio-based Sawdust-Cow Horn-Coconut Husk Particleboards

Oluwole Timothy Ojo, Temitope Olumide Olugbade · Journal of The Institution of Engineers (India): Series D · 2022

Effect of Sawdust Particle Size on Physical, Mechanical, and Energetic Properties of Pinus durangensis Briquettes

Christian Osvaldo Zepeda-Cepeda, José Rodolfo Goche-Télles, Celina Palacios-Mendoza · Applied Sciences · 2021

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

9

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.