Skip to content
Research Article Open access CC BY 4.0

Investigating the Effect of Metal Inert Gas Welding Parameters on AA10119 Mild Steel Quality by Taguchi Method

Jephthah A. Ikimi, Aigbovbiosa A. Momodu, Erhuvwu Totore

Journal of Engineering Research and Reports · pp. 57–63 · Published 8 May 2021

10.9734/jerr/2021/v20i617327

Abstract

In welding, the quality of welded joints is greatly influenced by the welding process parameters. Thus, in order to achieve a good weld quality, there is exigency to select the right welding process parameters. The focus of this study is to investigate the effect of Metal Inert Gas (MIG) welding process parameters; welding current, welding voltage and welding speed on the tensile strength of mild steel AA10119 welded plates. The experiment was designed using Taguchi’s L9 orthogonal array with three levels. Kaierda MIG MAG Inverter CO2 Welder Model E-180 welding machine was used to conduct the experiments with three repetitions. From the analysis carried out by applying Taguchi’s method, the result shows that the welding speed and welding current have the most significant influence on tensile strength of the weld and an optimum parameter setting of A3B2C2 was suggested; welding current 240 A, welding voltage 25 V and welding speed 0.010 m/s. The mean tensile strength at this optimal setting A3B2C2 was predicted to be 442 N/mm2.

Tensile strength Metal Inert Gas (MIG) welding mild steel Taguchi method

Cited by 1

1 citation reported by external sources — individual citing-article records aren't available to list yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

1

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.