Skip to content
Research Article Open access CC BY 3.0

Characterization of Plasma Sprayed Pure Red Mud Coatings: An Analysis

Alok Satapathy, Harekrushna Sutar, Subash Chandra Mishra, Santosh Kumar Sahoo

Chemical Science International Journal · pp. 151–163 · Published 23 Mar 2013

10.9734/ACSJ/2013/3218

Abstract

The characteristics of plasma sprayed pure red mud coatings have been investigated.The red mud was collected as a waste from aluminium production. In order to understand the coating characteristics, pure red mud was plasma coated. After plasma spraying, the coated materials have been subjected to series of tests to determine coating thickness, adhesion strength, micro structural characterization of cross section, X-ray diffraction and coating deposition efficiency. Plasma spraying is done at 200, 250, 300 and 400 ampere current. Torch input power is maintained at 6,9,12 and 16 kW. The coating samples chose are dimension 50mm×25mm×2mm. Available substrates are made of aluminium, copper, mild steel and stainless steel.  

Plasma spraying red mud coating coating characteristics

Cited by 17

SLIDING WEAR BEHAVIOR OF MARBLE DUST PRE-MIXED WITH NiCr COATINGS ON MILD STEEL SUBSTRATES AT ELEVATED TEMPERATURE

SANDIP KUMAR NAYAK, ALOK SATAPATHY, SISIR MANTRY · Surface Review and Letters · 2023

Erosion Response of High-Velocity Oxy-Fuel Sprayed Marble Dust-NiCr Coatings

Sandip Kumar Nayak, Alok Satapathy, Sisir Mantry · Transactions of the Indian Ceramic Society · 2022

Characterization and corrosion behaviour of plasma sprayed Zn-Sn alloy coating on mild steel

O.P. Oladijo, M.H. Mathabatha, A.P.I. Popoola · Surface and Coatings Technology · 2018

Prospects for the Application of Restoring Electric Arc Coatings in the Repair of Machines and Mechanisms

Oleksandr Lymar, Dmytro Marchenko · 2022 IEEE 4th International Conference on Modern Electrical and Energy System (MEES) · 2022

Sliding Wear Performance Evaluation of Red Mud (RM), RM + Fly Ash (FA) and RM + FA + Al Coatings on Mild Steel

Harekrushna Sutar, Debashis Roy, Subash Chandra Mishra · Materials Sciences and Applications · 2016

A study on coatability of marble dust on metal substrates

S. K. Nayak, A. Satapathy, S. Mantry · Materialwissenschaft und Werkstofftechnik · 2023

Effect of Red Mud (RM) Reinforcement on Physio-Chemical Characteristics of Ordinary Portland Slag Cement (OPSC) Mortar

Harekrushna Sutar, Rabiranjan Murmu, Debashis Roy · Advances in Materials Physics and Chemistry · 2016

Use of waste foundry sand (WFS) to produce protective coatings on aluminum alloy by plasma electrolytic oxidation

Carime dos Santos Souza, Maria Lúcia Pereira Antunes, Luiz Veriano Oliveira Dalla Valentina · Journal of Cleaner Production · 2019

Bauxite Residue/Red Mud

Quentin D. Avery, Manfred Bach, Stephan Beaulieu · Springer Series in Materials Science · 2022

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

17

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.