Review on the Design, Geometry and Mechanical Modeling of Piezoelectric Energy Harvesting Structures

References (95)

1. 1 Analysis of a micro-electric generator for microsystems [DOI]
2. 2 IEEE Transactions on Industrial Electronics [DOI]
3. 3 A Distributed Parameter Electromechanical Model for Cantilevered Piezoelectric Energy Harvesters [DOI]
4. 4 A review of piezoelectric energy harvesting based on vibration [DOI]
5. 5 Advances in energy harvesting using low profile piezoelectric transducers [DOI]
6. 6 A comparison between several vibration-powered piezoelectric generators for standalone systems [DOI]
7. 7 Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries [DOI]
8. 8 On Mechanical Modeling of Cantilevered Piezoelectric Vibration Energy Harvesters [DOI]
9. 9 An optimized self-powered switching circuit for non-linear energy harvesting with low voltage output [DOI]
10. 10 Double synchronized switch harvesting (DSSH): a new energy harvesting scheme for efficient energy extraction [DOI]
11. 11 Design of Piezoelectric Energy Harvesting Systems: A Topology Optimization Approach Based on Multilayer Plates and Shells [DOI]
12. 12 Topology optimization of smart structures: design of piezoelectric plate and shell actuators [DOI]
13. 13 Structural optimization under equivalent static loads transformed from dynamic loads based on displacement [DOI]
14. 14 Size-dependent bending and vibration behaviour of piezoelectric nanobeams due to flexoelectricity [DOI]
15. 15 A finite element model for the static and dynamic analysis of a piezoelectric bimorph [DOI]
16. 16 Actuator Placement Optimization and Adaptive Vibration Control of Plate Smart Structures [DOI]
17. 17 Dynamic topology optimization of piezoelectric structures with active control for reducing transient response [DOI]
18. 18 Energy Harvesting from Ambient Vibrations and Heat [DOI]
19. 19 Dynamic Response Topology Optimization in the Time Domain Using Equivalent Static Loads [DOI]
20. 20 Sensor shape design for piezoelectric cantilever beams to harvest vibration energy [DOI]
21. 21 Topology optimization of piezoelectric energy harvesting devices considering static and harmonic dynamic loads [DOI]
22. 22 Materials, structures and power interfaces for efficient piezoelectric energy harvesting [DOI]
23. 23 Free vibration analysis of FG plate with piezoelectric layers using four-variable refined plate theory [DOI]
24. 24 PZT/PVDF composites doped with carbon nanotubes [DOI]
25. 25 A low-power circuit for piezoelectric vibration control by synchronized switching on voltage sources [DOI]
26. 26 Vibration suppression of boring bar by piezoelectric actuators and LR circuit [DOI]
27. 27 High-performance piezoelectric vibration energy reclamation [DOI]
28. 28 Design methodology of piezoelectric energy-harvesting skin using topology optimization [DOI]
29. 29 Self-powered nonlinear harvesting circuit with a mechanical switch structure for a bistable generator with stoppers [DOI]
30. 30 Design of piezoelectric energy harvesting devices subjected to broadband random vibrations by applying topology optimization [DOI]
31. 31 Topology optimization of a cantilevered piezoelectric energy harvester using stress norm constraints [DOI]
32. 32 Integrated optimization of structural topology and control for piezoelectric smart plate based on genetic algorithm [DOI]
33. 33 Topology optimization of piezoelectric sensors/actuators for torsional vibration control of composite plates [DOI]
34. 34 Design and testing for shape control of piezoelectric structures using topology optimization [DOI]
35. 35 Thin-Film Piezoelectric Unimorph Actuator-Based Deformable Mirror With a Transferred Silicon Membrane [DOI]
36. 36 An energy harvester combining a piezoelectric cantilever and a single degree of freedom elastic system [DOI]
37. 37 Three-port equivalent circuit of multi-layer piezoelectric stack [DOI]
38. 38 A contribution on the optimal design of a vibrating cantilever in a power harvesting application – Optimization of piezoelectric layer distributions in combination with advanced harvesting circuits [DOI]
39. 39 Design and analysis of charge-recovery driving circuits for portable peristaltic micropumps with piezoelectric actuators [DOI]
40. 40 Innovative Digital Self-Powered Autonomous System for Multimodal Vibration Suppression [DOI]
41. 41 Topology optimization of piezo modal transducers with null-polarity phases [DOI]
42. 42 Implementation of a Single Supply Pre-biasing Circuit for Piezoelectric Energy Harvesters [DOI]
43. 43 On the effect of self-penalization of piezoelectric composites in topology optimization [DOI]
44. 44 Enhancement of efficiency of vibration suppression using piezoelectric elements and LR circuit by amplification of electrical resonance [DOI]
45. 45 Maximization of the harvested power from piezoelectric bimorphs with multiple electrodes under dynamic excitation [DOI]
46. 46 Trigger Circuits in Battery-less Multi-source Power Management Electronics for Piezoelectric Energy Harvesters [DOI]
47. 47 Topology Optimization of Piezoelectric Energy Harvesting Strap Buckle [DOI]
48. 48 Modal Approach for Optimal Design of Two-Layer Piezoelectric Vibration Energy Harvesters [DOI]
49. 49 A study of low level vibrations as a power source for wireless sensor nodes [DOI]
50. 50 An experimentally validated bimorph cantilever model for piezoelectric energy harvesting from base excitations [DOI]
51. 51 Journal of intelligent material systems and structures [DOI]
52. 52 The Energy Harvesting Eel: a small subsurface ocean/river power generator [DOI]
53. 53 Improved Design and Analysis of Self-Powered Synchronized Switch Interface Circuit for Piezoelectric Energy Harvesting Systems [DOI]
54. 54 Efficiency of energy conversion for a piezoelectric power harvesting system [DOI]
55. 55 Generation of electrical energy for portable devices [DOI]
56. 56 Flexoelectric effect on the electroelastic responses of bending piezoelectric nanobeams [DOI]
57. 57 Beam Shape Optimization for Power Harvesting [DOI]
58. 58 Design and performance of variable-shaped piezoelectric energy harvesters [DOI]
59. 59 Design optimization of piezoelectric energy harvester subject to tip excitation [DOI]
60. 60 Topology optimization of piezoelectric nanostructures [DOI]
61. 61 Comparison of electromagnetic and piezoelectric vibration energy harvesters with different interface circuits [DOI]
62. 62 Optimization of a circular piezoelectric bimorph for a micropump driver [DOI]
63. 63 Topology optimization of compliant mechanical amplifiers for piezoelectric actuators [DOI]
64. 64 Dynamic Design of Piezoelectric Laminated Sensors and Actuators using Topology Optimization [DOI]
65. 65 Nonlinear technique and self-powered circuit for efficient piezoelectric energy harvesting under unloaded cases [DOI]
66. 66 A conceptual study on the dynamics of a piezoelectric MEMS (Micro Electro Mechanical System) energy harvester [DOI]
67. 67 Thermal energy harvesting by piezoelectric PVDF polymer coupled with shape memory alloy [DOI]
68. 68 Topology optimization of embedded piezoelectric actuators considering control spillover effects [DOI]
69. 69 MEMS interdigitated electrode pattern optimization for a unimorph piezoelectric beam [DOI]
70. 70 Numerical modeling of shape and topology optimisation of a piezoelectric cantilever beam in an energy-harvesting sensor [DOI]
71. 71 Optimization of rectifier circuits for a vibration energy harvesting system using a macro-fiber composite piezoelectric element [DOI]
72. 72 Topology optimization of piezoelectric materials and application to the cantilever beams for vibration energy harvesting [DOI]
73. 73 Electromechanical analysis of an adaptive piezoelectric energy harvester controlled by two segmented electrodes with shunt circuit networks [DOI]
74. 74 Design of piezoelectric microtransducers based on the topology optimization method [DOI]
75. 75 Piezoelectric Unimorph Microactuator Arrays for Single-Crystal Silicon Continuous-Membrane Deformable Mirror [DOI]
76. 76 Beam vibration control using cellulose-based Electro-Active Paper sensor [DOI]
77. 77 A new equivalent circuit for piezoelectrics with three losses and external loads [DOI]
78. 78 On analytical and finite element modelling of piezoelectric extension and shear bimorphs [DOI]
79. 79 Modeling and parametric analysis of a unimorph piezocomposite energy harvester with interdigitated electrodes [DOI]
80. 80 Piezoelectric bimorph charge mode force sensor [DOI]
81. 81 A two-way shape memory alloy-piezoelectric bimorph for thermal energy harvesting [DOI]
82. 82 Size-dependent constituent equations of piezoelectric bimorphs [DOI]
83. 83 Topology optimum design of unimorph piezoelectric cantilevered Mindlin plates as a vibrating electric harvester [DOI]
84. 84 Mathematical Modeling of an Active-Fiber Composite Energy Harvester with Interdigitated Electrodes [DOI]
85. 85 Incorporating piezoelectric energy harvester in tunable vibration absorber for application in multi-modal vibration reduction of a platform structure [DOI]
86. 86 Analog self-powered harvester achieving switching pause control to increase harvested energy [DOI]
87. 87 An improved PZT cantilever SPICE model for practical energy harvesting circuits simulations and measurements [DOI]
88. 88 SH Waves in (1 –x)Pb(Mg1/3Nb2/3)O3- xPbTiO3 Piezoelectric Layered Structures Loaded with Viscous Liquid [DOI]
89. 89 Integrated and Consistent Active Control Formulation and Piezotransducer Position Optimization of Plate Structures considering Spillover Effects [DOI]
90. 90 Electrical Interfacing Circuit Discussion of Galloping-based Piezoelectric Energy Harvester [DOI]
91. 91 Effect of geometrical and environmental parameters on vibration of multi-layered piezoelectric microcantilever in amplitude mode [DOI]
92. 92 Optimal Design of Self-powered Piezoelectric Vibration Energy Harvesting Circuit
93. 93 Journal of Mechanical Science and Technology [DOI]
94. 94 International Journal of Precision Engineering and Manufacturing [DOI]
95. 95 A low-power circuit for piezoelectric vibration control by synchronized\n switching on voltage sources [DOI]

Cited by 4