Skip to content
Research Article Open access CC BY 4.0

Temperature-Dependent Study of Optical, Electrical, and Structural Properties of Gadolinium-Doped Zirconium Sulphide Thin Films Fabricated Via Electrostatic Spray Deposition Technique for Optoelectronic Applications

Cletus Olisenekwu, Samuel Oghenemega Shaka, Oyibo Dafe Precious, Imosobomeh L. Ikhioya, Raceforth Atori

Asian Journal of Research and Reviews in Physics · pp. 33–44 · Published 28 Jul 2025

10.9734/ajr2p/2025/v9i3197

Abstract

This study investigates the structural, optical, morphological, and electrical properties of gadolinium-doped zirconium sulphide (ZrS/Gd) thin films created using the Electrostatic Spray Deposition (ESD) method with respect to the effects of deposition temperature. Thin films deposited at 30°C, 34°C, and 36°C were compared to undoped ZrS. All samples exhibited a significant UV absorbance peak in the range of 340 to 400 nm during optical characterization; the absorbance was minimal at 36°C and maximum at 30°C, indicating a reduction in absorbance due to heat. In the visible and near-infrared ranges, transmittance rose with temperature, peaking at 36°C. Reflectance also increased with the deposition temperature, exhibiting a temperature-dependent trend. Non-linear temperature dependency was indicated by the optical band gap energies of 3.19 eV (pristine), 3.27 eV (30°C), 3.18 eV (34°C), and 3.58 eV (36°C). Electrical studies showed that when conductivities increased at 1.65 S/m, 1.78 S/m, 1.75 S/m, and 1.68 S/m, respectively, resistivity reduced from 0.6058 Ω·m (pristine) to 0.5614 Ω·m (30°C), increased slightly to 0.5717 Ω·m (34°C), and subsequently decreased to 0.5938 Ω·m (36°C). As the temperature rose, X-ray diffraction (XRD) examination revealed increased crystallinity and grain development, while SEM micrographs revealed a uniform distribution of nanoparticles free of pinholes. By serving as active nucleation sites, gadolinium ions encouraged the development of more homogeneous and densely packed grains. This eliminates pinholes by forming a film in which the grains more effectively fill in the spaces. These findings highlight the significant role of deposition temperature in optimizing the optoelectronic performance of ZrS/Gd thin films for potential applications in photonic sensors, solar cells, and display technologies.

Gadolinium zirconium-sulphide electrostatic-spray optoelectronics bandgap thin film characterization

Cited by 1

1 citation reported by external sources — individual citing-article records aren't available to list yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

1

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.