Oxygen and Hydrogen Reaction “In situ” with Magnesium and Tantalum in a Mechanical Milling System When a Solvent is Used
José Luis Iturbe-Garcia, Beatriz Eugenia López-Muñoz
Current Journal of Applied Science and Technology · pp. 1–9 · Published 21 Mar 2016
10.9734/BJAST/2016/23371Abstract
The purpose of this paper is study the preparation “in situ” of magnesium–tantalum phases when reacted with oxygen and hydrogen during a mechanical milling process. Different phases were formed as function of the milling time. High energy ball milling was utilized to prepare hydrogenated compounds by controling the milling between 5 and 20 hours with a ball powder weight ratio of 10 and using methanol as the control agent. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used to characterize the compounds. The XRD results at 20 h of milling revealed that only hydrogenated species (Ta2H and TaH0.5) and Mg(OH)2 were present.
References (14)
- 1 Hydrogen-storage materials for mobile applications [DOI]
- 2 Hydrogen storage in Mg: A most promising material [DOI]
- 3 Catalytic effect of transition metals on hydrogen sorption in nanocrystalline ball milled MgH2–Tm (Tm=Ti, V, Mn, Fe and Ni) systems [DOI]
- 4 Nanocrystalline metals prepared by high-energy ball milling [DOI]
- 5 An overview of advanced materials for hydrogen storage [DOI]
- 6 Evaluation of tantalum-based materials for hydrogen separation at elevated temperatures and pressures☆ [DOI]
- 7 Optimal design of a Type 3 hydrogen vessel: Part I—Analytic modelling of the cylindrical section [DOI]
- 8 Mechanically milled Mg composites for hydrogen storage: the relationship between morphology and kinetics [DOI]
- 9 Hydrogen sorption properties of Mg–1 wt.% Ni–0.2 wt.% Pd prepared by reactive milling [DOI]
- 10 Metal hydrides: A review of group V transition metals—niobium, vanadium and tantalum [DOI]
- 11 Operating characteristics of a LH2-fuelled automotive vehicle and of a semi-automatic LH2-refuelling station [DOI]
- 12 Synthesis of the Mg2Ni Alloy Prepared by Mechanical Alloying Using a High Energy Ball Mill [DOI]
- 13 Synthesis of Tantalum Hydride Using Mechanical Milling and Its Characterization by XRD, SEM, and TGA [DOI]
- 14 Hydrogen desorption from tantalum with segregated oxide surface layers [DOI]
Cited by 2
José Luis Iturbe-García, Dalia Lucia Peña-Ferreyra · International Journal of Hydrogen Energy · 2020
Showing 1 of 2 known citations — external sources report more than can currently be individually listed.
Related research
- Morphological and Anti-microbial Study of Whey Protein Concentrate Prepared by Dehydrating Milk Serum — shares topic coverage
- Organoleptic and Morphological Analysis of Citrus Peel Powder — shares topic coverage
- Spore Morphology of 34 Species of Monilophyta from Northern Parts of Iran — shares topic coverage
- Synthesis and Characterization of Epichlorohydrin- Crosslinked Lumbang (Aleurites moluccana)-Derived Activated Carbon Chitosan Composite as Cr(VI) Bioadsorbent — shares topic coverage
- Mycotoxin and Fungal Contamination of Fresh and Dried Tomato — shares topic coverage
Article metrics
Real usage data collected on this platform.
26
Page views
0
PDF downloads
4
Outbound clicks
2
Citations
Views over time
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
Traffic sources
Referring site, by host.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.