Characterization of the Effect of Moisture on Tribology of Titanium Rubbed Against Different Pin Materials

Abstract

Tribology investigations were conducted to understand the effect of humidity and water adsorption at the interfacial surface on the friction coefficient of titanium. Pin-on-disk tribometer tests were conducted at different levels of humidity ranging from 0% to 71% RH using aluminum and steel pins on a titanium plate. The variation of the mean coefficient of friction was plotted as a function of relative humidity. The friction coefficient slightly decreased when the relative humidity was increased from 0% to 10% RH. However, it increased with a further increase in humidity. The maximum friction coefficients were observed at 55% and 65% RH for steel and aluminum, respectively. The thickness of the wear tracks also showed the same trend as the friction coefficient. Under high humidity conditions, water vapor can condense on the surface of the moving machine parts. To understand the influence of this water film, a pin-on-disk test was carried out on a sample where a thin film of water masks metal surfaces from contact. Although the coefficient of friction was similar for both the aluminum and steel pins’ interaction with titanium (~0.36), the wear tracks were not formed for steel pin/titanium interaction even though this experiment was conducted for more cycles.