Skip to content
Research Article Open access CC BY 3.0

Cure Characteristics and Rheological Properties of Modified Kaolin-natural Rubber Composites

L. E. Yahaya, K. O. Adebowale, B. I. Olu-Owolabi

Chemical Science International Journal · pp. 472–480 · Published 18 Feb 2014

10.9734/ACSJ/2014/6575

Abstract

Aim: This study seeks to examine the cure characteristics and rheological properties of modified kaolin – Natural rubber vulcanizates. Methodology: Metal salt of rubber seed oil (RSO-Na) was used to modify kaolin and was then introduced into Natural Rubber (NR) by melt intercalation to produce vulcanizates mixed with various compositions of pristine and modified kaolin (2 - 10 Parts per hundred rubbers). Results: Characterization of the modified kaolin using X- ray diffraction revealed increase in d-spacing from 7.15 to 14 Ǻ. Torque minimum (ML), torque maximum (MH) which are correlated with hardness increased with increasing organoclay loading. The storage modulus (G1), loss modulus (G11 and complex viscosity (Ƞcomplex) increased with increase in modified kaolin thus showing remarkable improvements of the vulcanizates. Conclusion: The results from the study indicate that the modified filled kaolin has a dramatic improvement on the NR composite compared to the pristine.  

Intercalation torque maximum natural rubber kaolin complex viscosity

Cited by 13

The potential of kaolin as a reinforcing filler for rubber composites with new sulfur cure systems

Saad H Sheikh, Xuena Yin, Ali Ansarifar · Journal of Reinforced Plastics and Composites · 2017

Features of Abrasive Wear of Elastomer Composites with Corundum Microspheres at Low Temperatures

Federal Research Centre “The Yakut Scientific Centre of the Siberian Branch of the Russian Academy of Sciences”, Institute of Oil and Gas Problems SB RAS, N.V. Shadrinov, P.N. Petrova · Trenie i Iznos · 2021

The Features of Abrasive Wear of Elastomeric Composite with Corundum Microspheres at Low Temperatures

N. V. Shadrinov, P. N. Petrova, A. F. Fedorova · Journal of Friction and Wear · 2021

The effect of the plasticizer injection method on the physical -mechanical and low-temperature properties of rubbers based on mixtures of polar and nonpolar rubbers

Nikolay V. Shadrinov, Aytalina F. Fedorova, Aytalina P. Shaposhnikova · Journal of Elastomers & Plastics · 2025

Comparative Analysis of the Effect of HDPE and UHMWPE on the Properties of Nitrile Butadiene Rubber

N. V. Shadrinov, A. F. Fedorova, V. D. Gogolev · Theoretical Foundations of Chemical Engineering · 2024

Effect of Vulcanization System on the Structure and Properties of Polymer-Elastomer Composite Materials

N. V. Shadrinov, A. R. Khaldeeva, A. L. Fedorov · Polymer Science, Series A · 2023

Preparation and application of modified organo-kaolinite by microwave-assisted irradiation

A. Feriancová, A. Dubec, J. Pagáčová · Applied Clay Science · 2021

Thermophysical and Dynamic Properties of Nitrile Butadiene Rubber Filled with Ultra-High Molecular Weight Polyethylene

N. V. Shadrinov, A. A. Borisova · Inorganic Materials: Applied Research · 2021

Rheological and Mechanical Properties of Polyisobutylene Filled with Nanosilica, Zinc Oxide and Titanium Oxide

Siti Irdina, Amin Firouzi, Muhammad Remanul Islam · Advanced Structured Materials · 2022

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

13

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.