Skip to content
Research Article Open access CC BY 3.0

Experimental Production of Sustainable Lightweight Foamed Concrete

Alonge O. Richard, Mahyuddin Ramli

Current Journal of Applied Science and Technology · pp. 994–1005 · Published 12 Jul 2013

10.9734/BJAST/2013/4242

Abstract

Lightweight foamed concrete is recently acceptable for use in low strength capacity for building and civil construction purposes as a result of its peculiar features such as low thermal conductivity, low self weight and self compacting features hence its high workability. But it major demerits is its difficulty of high strength development when compared with normal concrete. The maximum strength achieved so far is less than 25MPa even at higher density of between 1500kg/m3 and 1800kg/m3. Strength development of foamed concrete depends largely on some factors which are the constituents of the base mix, the density of foam and the water cement ratio of the base mix. This paper studies the base mix parameters to produce a sustainable foamed concrete by substituting cement which is a source of carbon dioxide, a green house emission elements, with a cementitious material, fly ash within a range of 10% up to 50% and water cement ratio of 3.0 was used. Notraite PA-1 was used as foam agent and prefoamed method was adopted for the production of the foamed concrete. With a target density of 1600kg/m3, the compressive strength result of 10.5MPa reveals that a high strength sustainable foamed concrete structural panel could only be produced with 10% replacement of cement.

Concrete sustainable concrete lightweight foamed concrete compressive strength fly ash.

Cited by 20

Flexural behavior of slabs made of lightweight foamed concrete with basalt powder

Hanadi Al-Zubaidi, Rabab Allouzi · Journal of Engineering, Design and Technology · 2023

Influence of Sub-zero Temperatures on the Dynamic Behaviour of Foam Concrete with Sand

Yongliang He, Mingshi Gao, Dong Xu · KSCE Journal of Civil Engineering · 2021

Sustainable one-part geopolymer foams with glass fines versus sand as aggregates

Ailar Hajimohammadi, Tuan Ngo, Alireza Kashani · Construction and Building Materials · 2018

Physical and mechanical properties of foam concretes containing granulated blast furnace slag as fine aggregate

Osman Hulusi Oren, Aliakbar Gholampour, Osman Gencel · Construction and Building Materials · 2020

Reuse of industrial and agricultural by-products as pozzolan and aggregates in lightweight concrete

S.N. Chinnu, S.N. Minnu, A. Bahurudeen · Construction and Building Materials · 2021

Progress of Application of Digital Image Correlation Method (DIC) in Civil Engineering

Yu Wang, Lida Qin · 2023 International Seminar on Computer Science and Engineering Technology (SCSET) · 2023

Influence of expanded vermiculite powder and silica fume on properties of foam concretes

Fuat Koksal, Yusa Sahin, Osman Gencel · Construction and Building Materials · 2020

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

20

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.