Skip to content
Research Article Open access CC BY 4.0

Development and Performance Evaluation of a Pedal Operated Hydraulic Jack

Mohammed Tiamiyu Ishola, Olugbade Temitope Olumide, Odesanmi Gbenga Abiodun

Journal of Scientific Research and Reports · pp. 1–8 · Published 19 Jun 2015

10.9734/JSRR/2015/18887

Abstract

Aims: The paper developed an accessory that can be connected to the hydraulic jack to operate it by pedaling while standing upright at a convenient position. It is characterized by an adjustable rectangular frame that occupies less floor space, and wheels to facilitate easy positioning. Study Design: Thorough design analysis of the member components were done to determine their actual dimensions and specifications required. The device has been designed for light weight automobile, car. Although the maximum weight of a car is not more than 2.5 tonnes, but the device was designed for a 3 tonne hydraulic jack, ensuring reasonable factor of safety. Place and Duration of Study: Department of Mechanical Engineering, Federal University of Technology, Akure, Ondo State, Nigeria, between February 2014 and December 2014. Methodology: An adjustable rectangular frame was incorporated. This occupied less floor space, and wheels to facilitate easy positioning. A low stiffness, 1.61 N/mm, tension spring was used to be the actuator of the hydraulic fluid pumping and thus enhances soft and easy pedaling for the user. The material used for the fabrication of the mechanism component was mild steel which was selected based on the design analysis result, availability and low cost for cost effectiveness. Results: Performance evaluation of the fabrication, compared with that of hand operated hydraulic jack revealed similar characteristics for both jacks but greater efficiency for the designed pedal operated jack in terms of safety and ease of operation. The test results showed that this pedal operated hydraulic lifter for automobile workshops performed much more efficiently than the hand operated hydraulic lifter. Conclusion: This design has really curbed the problems encountered by hydraulic jack users. It makes work easy for female users who cannot easily and conveniently bend or stoop down to jack up their vehicles for a purpose and old men who are too feeble to stoop low under their vehicle to jack it up.

Design efficiency hydraulic jack pedals vehicles.

Cited by 1

Simulation-based analytical design for aluminium recycling processing plant

Oluwole Timothy Ojo, Temitope Olumide Olugbade, Babatunde Olamide Omiyale · Analecta Technica Szegedinensia · 2021

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

1

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.