Skip to content
Research Article Open access CC BY 3.0

Monitoring and Evalution of Exotherms as Trouble-Shooting Processes in Polyurethane Foam Manufacture

M. B. Dalen, A. Q. Ibrahim, H. M. Adamu

Chemical Science International Journal · pp. 813–827 · Published 27 Jun 2014

10.9734/ACSJ/2014/11361

Abstract

Monitoring and evalution of exotherms as temperature rises were investigated using various foam formulations from two types of polyols with variations in blow indices as volume of water added.  It was observed that exotherms increase linearly with blow index.  The results also showed that density variations are in inverse relationship with the exotherms, foam heights and compression sets. Furthermore, it was similarly observed that as the blow index increases, ΔT1 and ΔT2 increase for both conventional (CPO) and polymer (PPO) polyols far above the acceptable temperature range of 22-26ºC for foam manufacture with consequences on physical properties.  

Conventional polyols ; polymeric polyol exotherms density compression set

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.