Skip to content

All published articles 999

A Review on Effect of Solvents on Fluorescent Spectra

Firew Tarekegn Gemeda · Chemical Science International Journal · 2017

When absorption spectra are measured in solvents of different polarity, it is found that the positions, intensities, and shapes of the absorption bands are usually modified by these solvents. These changes are a result of physical intermolecular solute–solvent interaction forces...

Open access Research Article 10.9734/CSJI/2017/32006

Green Remediation of Carbamazepine from Water Using Novel Magnetic Iron Modified Carbonized Baggasse: Kinetics, Equilibrium and Mechanistic Studies

Selly Jemutai-Kimosop, Veronica A. Okello, Francis Orata, Zachary M. Getenga & Victor O. Shikuku · Chemical Science International Journal · 2017

Baggasse derived biochar magnetically modified with iron (α-Fe2O3-CBG) was fabricated, characterized and applied as a low-cost adsorbent for the removal of carbamazepine (CBZ), a pharmaceutically active compound which has been reported as an emergent water contaminant. Characteri...

Open access Research Article 10.9734/CSJI/2017/32444

Removal of Aniline and from Aqueous Solutions by Coagulation/Flocculation–Flotation

Shahin Ahmadi, Ferdos Kord Mostafapour & Edris Bazrafshan · Chemical Science International Journal · 2017

The aim of this study was to evaluate the efficiency of the coagulation/ flocculation and flotation process for aniline removal from aqueous solutions, which the dissolved air flotation (DAF) was applied in laboratory scale. After determination of the optimal condition of pH and...

Open access Research Article 10.9734/CSJI/2017/32016

Photochemical Study for Solar Energy Conversion & Storage in Solar Cell: Yellow 5GN-EDTA System

Kanta Meena, Shiv Ram Saini & R. C. Meena · Chemical Science International Journal · 2017

The photovoltages and photocurrent in photogalvanic cell were studied for conversion and storage of solar energy by using yellow 5GN as a photo sensitizer and EDTA as a reductant. The observed cell performance in terms of photopotential, photocurrent, conversion efficiency, fill...

Open access Research Article 10.9734/CSJI/2017/29925

Spectrophotometric Determination of Total Phenol and Flavonoid Contents of Aerial Parts of Blepharis edulis (Pers.)

Alsiddig Osama, Sufyan Awdelkarim & Mohamed Ezeldin · Chemical Science International Journal · 2017

Quantitative determination of phenols and flavonoids of Blepharis edulis aerial parts was carried out using spectrophotometery techniques. Gallic acid and quercetin were used as the standards for calibration for the phenols and flavonoids respectively. B. edulis commonly known as...

Open access Research Article 10.9734/CSJI/2017/25916

Assessment of Physico-chemical Suitability of Groundwater for Drinking and Agriculture Purposes in Bonoua and Samo (South-East Côte d’Ivoire)

Ahoussi Kouassi Ernest, Koffi Yao Blaise, Kouassi Amani Michel, Aké Gabriel Étienne & Biémi Jean · Chemical Science International Journal · 2017

Aims: The goal of this study is to know the quality of groundwater from Bonoua and Samo, for drinking and irrigation purposes. Methodology: Three (3) samples from boreholes and hand dug wells were taking for this study. Then groundwater quality and its suitability for irrigation...

Open access Research Article 10.9734/CSJI/2017/30787

Metabolites Detected in the Crude N-Hexane Extract of Artemisia annua Linn (Asteraceae) Cultivated in Langtang, Plateau State, Nigeria

Cyril E. Manulu, Esther A. Adelakun & Jeremiah I. Abok · Chemical Science International Journal · 2017

Artemisia annua was grown in and harvested from Langtang, Plateau State in Nigeria. The dried pulverized aerial part of Artemisia annua was extracted with n-hexane by percolation and concentrated in vaccum at 40°C. Analysis of crude n-hexane extract by GC-MS revealed twelve major...

Open access Research Article 10.9734/CSJI/2017/28602

Exploring Gmelina arborea Leaves for Biofuels and Petrochemical and Pharmaceutical Feedstocks

H. Ibrahim, S. Ayilara, K. O. Nwanya, A. S. Zanna, O. B. Adegbola & D. C. Nwakuba · Chemical Science International Journal · 2017

An investigation was carried on the chemical constituents of Gmelina arborea leaves by hydrolyzing the pulverized dry leaves with 3% sulphuric acid solution at 100°C for 30 minutes. The extract on analysis with GCMS yielded 31 compounds. The major components of the extract includ...

Open access Research Article 10.9734/CSJI/2017/31407

Calorimetric Approach for the Detection of Modified Silica Efficiency as Chelating Agent for Heavy Metal Ions

Yolla Kazzi & Houssein Awada · Chemical Science International Journal · 2017

Chelating molecules with carboxyhydrazide functional group was immobilised on silica surface. The functional group was covalently bonded to the silica surface by sequential reactions of silica with dibromobutane, malonic ester and hydrazine in different media. The grafting reacti...

Open access Research Article 10.9734/CSJI/2017/31105

Concentration Levels and the Associated Health Risks of Elements in Food Crops Grown in the Neighbourhood of Minjingu Phosphate Mine, Tanzania

Najat K. Mohammed & Leonid L. Nkuba · Chemical Science International Journal · 2017

The concentration levels of heavy metals in food crops (maize and mung beans) grown in the neighbourhood of Minjingu Phosphate mine were analyzed using EDXRF. The metal concentrations in both food crops followed the following pattern Fe > Zn > Cu > Cd > Cr > Pb &gt...

Open access Research Article 10.9734/CSJI/2017/31476

Morphological and Microstructural Characterization of Organoclays from Low Smectite Containing Clays Materials

Emeka Thompson Nwankwere, Casimir Emmanuel Gimba, George Iloegbulam Ndukwe, Adamu Kari Isuwa & Yilleng Moses Titus · Chemical Science International Journal · 2017

Two low smectite-containing clay materials were modified, using hexadecyltrimethylammonium bromide (HDTMAB) as intercalating agents, under very mild experimental conditions, to investigate their potentials as suitable organoclays for industrial and environmental applications. Cha...

Open access Research Article 10.9734/CSJI/2017/29703

Evaluation of Performance of Corrosion Inhibitors Using Adsorption Isotherm Models: An Overview

Ekemini Ituen, Onyewuchi Akaranta & Abosede James · Chemical Science International Journal · 2017

Adsorption isotherm models are an important tool for describing interaction of corrosion inhibitors with metal surfaces which they are aimed to protect. In this paper, key adsorption isotherms used in corrosion inhibition studies have been reviewed. We have examined how some dedu...

Open access Research Article 10.9734/CSJI/2017/28976

Evaluation of Pozzolanic Activity of Illitic and Lateritic Raw Materials from Burkina Faso

I. Sanou, M. Seynou, L. Zerbo, Y. Millogo, R. Ouedraogo & A. Sana · Chemical Science International Journal · 2017

Aims: Evaluate the potentially use as pozzolan in cement replacement of activated Lateritic and Illitic raw materials from Burkina Faso. Place and Duration of Study: Laboratory of Molecular and Materials Chemistry-University of Ouagadougou, National Laboratory of Building and Pub...

Open access Research Article 10.9734/CSJI/2017/30995

Microwave Assisted Synthesis of Phenazines from β-Lapachones and Their Tuberculostatic Activity

Douglas Igor Santos de Oliveira, Lívia Fernandes do Amaral, Maria Cristina Silveira Lourenço, Nelilma Correia Romeiro, Vítor Won-Held Rabelo & Raphael Salles Ferreira Silva · Chemical Science International Journal · 2017

Aims: The study aimed to investigate de synthesis of phenazines by microwave assisted reactions and evaluate the tuberculostatic activity. Study Design: The method developed in the study is an alternative for the method described in the literature employing acetic acid, an effici...

Open access Research Article 10.9734/CSJI/2017/30943

Effects of Dry Washing Process on Denim Garment

Shikha Sarker, Md. Sharifur Rahman Rakesh, Md. Mohsin Alam & Abhijit Roy · Chemical Science International Journal · 2016

Denim garment is most widely used due to its appearance, comfort, strength, durability and low cost, which gives the customers utmost satisfaction. Denim garment does not inherit customer’s desired properties in the primary stage of manufacturing, but can be incorporated desirabl...

Open access Research Article 10.9734/CSJI/2016/29399