Die Attach Process Optimization with Enhanced Epoxy Control on Leadframe Package

Abstract

The paper presents a practical procedure in selecting the best candidate for die attach epoxy control or anti-epoxy bleed-out (anti-EBO) concentration during the introduction of new leadframe configuration. Three different criteria were implemented to measure the relative impact of the anti-EBO into the different interfaces inside a quad-flat no-leads multi-row (QFN-mr) leadframe unit. Die shear test is performed to measure the shear strength and the compatibility of the anti-EBO to the adhesive material. EBO measurement is performed herewith to study the propagation of epoxy bleed-out on the surface of the leadframe with reference to the different level of anti-EBO concentration. Package reliability is employed study the response of different interfaces directly in-contact with anti-EBO through thermal-cycling scenario. Ultimately, understanding the effect of anti-EBO into different set of tests provided a systematic way of selecting appropriate leadframe parameters for QFN-mr leadframe product.