Skip to content
Research Article Open access CC BY 4.0

Enhancing the Strength Characterisitics of Concrete Through the Use of Steel Fibre

F. A. Olutoge, G. M. Amusan, S. O. A. Olawale

Current Journal of Applied Science and Technology · pp. 1–10 · Published 14 Apr 2016

10.9734/BJAST/2016/25037

Abstract

The paper aims at studying the strength characteristics of steel fibre reinforced concrete (SFRC), within the fibre dosage of 0.5 to 2%. Discontinuous discrete steel fibres were explored in concrete of grade M60, and normal concrete of 0% steel fibre dosage used as control. The concrete behavioural properties were investigated under compression at 3, 7, 14, 21, 28, 90 and 120 curing days. Steel fibre reinforced concrete sample with highest compression yield were further examined under tension and flexure respectively. The findings revealed that, the addition of steel fibre to concrete improve the strength properties of the concrete, with better performance under compression, tensile and flexure compared to control concrete. The SFRC specimens were observed to yield a percentage increase of 3.96-10.54% in compression, 49.83-97.08% in tension and 13.63-28.27% flexural compare to the control. The presence of steel fibre was also observed to minimize crack propagation over conventional concrete, which shows that steel fibres helps in better bonding of the concrete and displays steel fibre reinforced concrete as to possess good ductility properties.

Steel fibre concrete compressive strength split tensile strength flexural strength

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.